Hamilton
Hamilton
905 548 9313 Mon-Fri: 09:00 - 5:00 89 Glow Ave, Hamilton On L8H 3V7 Canada [email protected]

Conveyors and Sorting Systems

FROM SINGLE MACHINE TO COMPLETE INSTALLATIONS

Forrec completes its own service with a wide range of conveyors perfect for the transportation of all recycled materials.  Forrec manufactures a large variety of industrial conveyors. In addition to conveyors Forrec will also supply metal ferrous separators and eddy current separators, to grant the complete proposal. The passage from single machine to the complete installation is something Forrec excels at.  Let us help you with your conveyor project today!

Metal Conveyors NTM

Metal Conveyors:

  • Frame – Built with tubes (80×80 mm thick) electrically welded with transverse frames every meter, made in rigged bolted stumps to facilitate installation with interchangeable sliding plates for chains, feet, side and lower protections.
  • Gear-motor – linked with a flange to the conveyor driving shaft in order to be easily taken apart when needed, with auto-breaking engine of suitable power.
  • Chain – With treated wheels for centering, containment on one side, wheel, bush and pin. The chain is lubricated on either side by a manually opened tank. Completed with lubrication system.
  • Side panels – In shaped iron plate, with external reinforcement every meter. A reinforcement plate will be fitted at their base along the whole length of the conveyor in contact with the material to carry, where the wear of the material is higher.
  • Slates – For the mod. NTM they are reinforced with loading devices in order to be lifted when necessary.

Available in different length and width according to the loading and unloading requests.

Rubber Conveyors NG

Metal conveyors with rubber cover:

  • Frame – Built with tubes (80×80 mm thick) electrically welded with transverse frames every meter, made in rigged bolted stumps to facilitate installation with interchangeable sliding plates for chains, feet, side and lower protections.
  • Gear-motor – linked with a flange to the conveyor driving shaft in order to be easily taken apart when needed, with auto-breaking engine of suitable power.
  • Chain – With treated wheels for centering, containment on one side, wheel, bush and pin. The chain is lubricated on either side by a manually opened tank. Completed with lubrication system.
  • Side panels – In shaped iron plate, with external reinforcement every meter. A reinforcement plate will be fitted at their base along the whole length of the conveyor in contact with the material to carry, where the wear of the material is higher.
  • Slates – For the mod. NTMG they are reinforced and covered with rubber.

Available in different length and width according to the loading and unloading requests.

Metal Conveyors with Rubber Cover NTMG

The metal conveyors with rubber cover are composed by:

  • Frame – Built with tubes (80×80 mm thick) electrically welded with transverse frames every meter, made in rigged bolted stumps to facilitate installation with interchangeable sliding plates for chains, feet, side and lower protections.

  • Gear-motor – linked with a flange to the conveyor driving shaft in order to be easily taken apart when needed, with auto-breaking engine of suitable power.

  • Chain – With treated wheels for centering, containment on one side, wheel, bush and pin. The chain is lubricated on either side by a manually opened tank. Completed with lubrication system.

  • Side panels – In shaped iron plate, with external reinforcement every meter. A reinforcement plate will be fitted at their base along the whole length of the conveyor in contact with the material to carry, where the wear of the material is higher.

  • Slates – For the mod. NTMG they are reinforced and covered with rubber.

Available in different length and width according to the loading and unloading requests.